Surface treatment can enhance the appearance of the product, impart it with special physical and chemical properties, increase the value and service life of the product. Refer to the types of surface treatment we can provide, which are suitable for CNC machining and sheet metal parts.
Remove the spiky or burr-like protrusions formed at the intersections of the part surfaces, maintaining the original color of the metal or plastic materials. This is the most common surface treatment.
A protective oxide layer is formed on the surface of metal products, which is corrosion-resistant, wear-resistant, has a variety of colors and a beautiful appearance. It is most commonly used for aluminum alloy materials.
Using the impact effect of high-speed sand flow to clean and roughen the surface of the parts, a certain degree of cleanliness and different roughness can be achieved, and is applicable to both metal and plastic materials.
Heated in a high-concentration chemical solution, it forms a dense protective film, which is used to enhance the corrosion resistance, improve the appearance and minimize light reflection. It is commonly used for steel and stainless steel materials.
Enable the powder paint to adhere to the parts, forming a hard coating film on the surface. The coating thickness is uniform and it is wear-resistant. It is commonly used for metal parts.
Liquid paint is sprayed onto the surface of the parts by compressed air. It is widely used for surface coating of products such as automobiles and electronics, and is applicable to both metal and plastic materials.
Coating a layer of another metal on the surface of the metal part, such as nickel, chrome, gold, zinc plating etc, it is corrosion-resistant, wear-resistant and has a beautiful appearance. It is suitable for metal parts.
Based on the surface treatment with chemical plating solution, the parts are immersed in the plating solution to form a metal film, no need for electricity. Suitable for metals and a few plastic materials (ABS, PP, PC).
Using the charged particles in the solution to form a uniform coating on the surface of the parts. Suitable for metal parts.
Reduce the surface roughness of the parts and achieve a shiny, smooth and mirror-like surface effect. Applicable to metal parts and plastic parts.
By grinding the surface of the parts to create lines, a fine and lustrous effect is achieved. Applicable to metal parts.
Using high-energy-density lasers to irradiate specific areas of the parts, special marks are left. Applicable to metal and plastic parts
Press the screen-printed plates with graphics and text onto the surface of the parts, and offer a wide range of color options. Suitable for metal and plastic parts.
EN
